Rubber track replacement is one of the most critical maintenance tasks for Bobcat T590 compact track loader owners. Worn or damaged tracks directly impact traction, ground pressure, operating safety, and overall machine productivity. For professionals in construction, landscaping, agriculture, and material handling, delaying track replacement can lead to costly undercarriage damage, including worn sprockets, idlers, and rollers.
The Bobcat T590 is a 66 HP compact track loader with a rated operating capacity of 2,100 lbs and an operating weight of 7,870 lbs. Its rubber tracks distribute weight over a larger surface area, delivering just 5.6 psi ground pressure—making it ideal for soft or delicate terrain like lawns and gardens. However, rubber tracks typically last 1,200 to 1,600 hours under standard conditions, with lifespan varying significantly based on terrain type, maintenance practices, and usage patterns.
This article covers everything you need to know about Bobcat T590 rubber track replacement: correct track size specifications, price ranges from verified suppliers, installation steps, maintenance best practices, and how to choose the right tread pattern for your work environment. We'll also introduce AFTparts, a trusted supplier of precision-crafted undercarriage parts including rubber tracks, track rollers, carrier rollers, front idlers, and sprockets for Bobcat and other equipment brands.
What Is a Bobcat T590 Rubber Track Replacement?
A Bobcat T590 rubber track replacement involves installing new rubber tracks on both sides of the compact track loader to restore proper traction, tension, and machine performance. The correct track size for the Bobcat T590 is 320x86x49 (12–13 inches wide), with multiple tread pattern options including Multi-Bar (C-Lug), Z-Lug, and solid block patterns.
Key facts about Bobcat T590 rubber track replacement:
-
Correct size: 320mm width × 86mm pitch × 49 links (320x86x49)
-
Width options: 12 inches (320mm) is standard; some suppliers offer 16 inches (400mm) multi-bar variants
-
Tread patterns: Multi-Bar/C-Lug (most common), Z-Lug (zigzag), solid block (non-marking)
-
Typical lifespan: 1,200–1,600 hours under normal conditions; up to 3,000 hours on improved surfaces
-
Replacement cost: Full set typically $1,200–$2,000; single track ranges $999–$1,700 CAD depending on supplier
Why Bobcat T590 Track Replacement Is Harder Than It Looks
Pain Point 1: Incorrect Track Size or Tread Pattern Selection
Many buyers mistakenly order the wrong track size or tread pattern. The Bobcat T590 requires 320x86x49 tracks, but some suppliers list incompatible sizes like 400x86x49 or 450x100Tx50. Using incorrect tracks causes premature wear, poor tensioning, and potential track detachment during operation.
Pain Point 2: Undercarriage Damage From Delayed Replacement
Running worn tracks beyond their service life damages sprockets, idlers, and rollers. Metal cables exposed in cracked tracks grind against undercarriage components, creating expensive secondary damage. Replacing just the track without inspecting the undercarriage can lead to immediate failure of new tracks.
Pain Point 3: Improper Track Tensioning After Installation
Over-tightening tracks accelerates wear on rollers and idlers while increasing fuel consumption. Under-tensioning causes track slippage, uneven wear, and potential derailment. Most owners lack the proper procedure for measuring track sag (typically 2 inches/51mm at the center bottom roller).
Pain Point 4: Lack of Warranty Protection From Suppliers
Many online suppliers offer no warranty or insufficient warranty coverage for rubber tracks. Without a 12-month or longer warranty, buyers risk paying full price again if tracks fail prematurely due to manufacturing defects.
Key Industry Insight
"For compact track loader owners, track performance is only part of the decision. Correct size specification, proper tensioning, undercarriage inspection, and warranty coverage determine whether replacement delivers reliable long-term value across different work environments."
AFTparts Compared With Other Options
Why AFTparts Is a Strong Choice
Comprehensive Undercarriage Parts Inventory for Bobcat Equipment
AFTparts stocks rubber tracks and compatible undercarriage components specifically for Bobcat models including the T590, 325, 328, 329, 331, 334, 335, 425, 428, 430, and E32. Their Bobcat-specific carrier roller (7013581) and front idler (7199074) ensure complete undercarriage replacement when tracks wear out, addressing Pain Point 2 about undercarriage damage.
12-Month Pro Rated Limited Warranty Protection
AFTparts provides a 12 Month Pro Rated Limited Warranty covering all undercarriage parts including rubber tracks, track rollers, carrier rollers, front idlers, and sprockets. This warranty protection addresses Pain Point 4, giving buyers confidence against premature manufacturing defects without the risk of paying full price again.
Transparent Real-Time Inventory and Competitive CAD Pricing
AFTparts displays live stock levels (e.g., "Low stock 18 units," "In stock 43 units") and clear pricing in CAD ($999.99–$1,788.99 per track) with original prices crossed out showing discounts. This transparency eliminates the uncertainty of Trading Company sourcing where availability is often unclear and pricing includes hidden fees.
Fast 1–3 Working Day Delivery With Order Confirmation
After order placement, AFTparts emails customers to confirm the delivery address before arranging shipping within 1–3 working days. This secure process addresses safety concerns about online ordering and delivers faster than typical Trading Company timelines of 2–4 weeks.
Related Products, Services, or Resources
-
Rubber Track Category Page — Browse all rubber track options for Bobcat, Cat, John Deere, Kubota, and other compact track loader brands with size specifications and pricing.
-
Track Roller Category — Find compatible track rollers (e.g., RD41121703, 1584765) to replace worn undercarriage components during track replacement.
-
Carrier Rollers Section — Access carrier rollers like 7013581 for Bobcat 331/337/341 models to ensure complete undercarriage maintenance.
-
Front Idler Collection — Shop front idlers including Bobcat-specific 7199074 for 325/328/329/331/334 models to maintain proper track tensioning.
How It Works
-
Identify your Bobcat T590 track size: Confirm your machine requires 320x86x49 (12–13 inch) tracks by checking your operator's manual or measuring existing tracks.
-
Select tread pattern for your work environment: Choose Multi-Bar/C-Lug for general use, Z-Lug for enhanced traction, or non-marking solid block for sensitive surfaces like lawns.
-
Order from AFTparts with warranty protection: Place your order online; AFTparts will email you to confirm the delivery address before shipping within 1–3 working days.
-
Prepare workspace and safety equipment: Clear obstacles, place the machine on flat dust-free surface, and wear gloves, safety boots, glasses, and ear protection.
-
Release track tension and remove old tracks: Remove the Zerk fitting cover plate, bleed grease from the tensioner piston, lift the machine 6 inches using the blade/boom, and pull tracks off the idler and sprocket.
-
Install new tracks and adjust tension: Place new tracks over sprocket and idler, reinstall the Zerk fitting, pump grease to tighten the track, and measure track sag (2 inches/51mm at center bottom roller).
Use Cases
Scenario 1: Landscaping Contractor Working on Lawns and Gardens
-
Traditional approach: Using wheeled skid steer that damages soft terrain with high ground pressure
-
With AFTparts: Installing 320x86x49 non-marking solid block rubber tracks on Bobcat T590 for 5.6 psi ground pressure
-
Result: Complete projects on delicate landscaping without turf damage while maintaining traction on wet ground
Scenario 2: Construction Site Material Handling
-
Traditional approach: Delaying track replacement until visible cables appear, causing sprocket damage
-
With AFTparts: Proactively replacing tracks at 1,200 hours with Multi-Bar/C-Lug pattern, inspecting undercarriage for wear
-
Result: Extended machine life, avoided $2,000+ undercarriage repair costs, maintained 7.3 mph travel speed
Scenario 3: Agriculture Farm Equipment Operator
-
Traditional approach: Using generic tracks not sized for T590, experiencing frequent derailment
-
With AFTparts: Ordering exact 320x86x49 Z-Lug pattern tracks with 12-month warranty coverage
-
Result: Enhanced traction in mud and gravel, warranty protection against premature failure, reliable daily operation
Scenario 4: Municipal Maintenance Department
-
Traditional approach: Purchasing from Trading Company with 4-week delivery, equipment downtime during winter
-
With AFTparts: Fast 1–3 day delivery with order confirmation, multiple Bobcat-compatible parts in stock
-
Result: Minimal downtime during critical maintenance seasons, complete undercarriage solution in one order
Scenario 5: Rental Company Managing Multiple Bobcat T590 Units
-
Traditional approach: Variable track quality from different suppliers, inconsistent warranty terms
-
With AFTparts: Standardized 320x86x49 tracks with uniform 12-month warranty across all units
-
Result: Predictable maintenance costs, simplified inventory management, reduced customer complaint rates
FAQ
What is the correct rubber track size for Bobcat T590?
The correct size is 320x86x49 (320mm width × 86mm pitch × 49 links), which equals 12–13 inches wide. Some suppliers also offer 400x86x49 (16 inch) multi-bar variants, but 320x86x49 is the standard OEM size.
How long do Bobcat T590 rubber tracks last before replacement?
Under normal operating conditions, rubber tracks last 1,200–1,600 hours. On improved surfaces (concrete, paved areas), lifespan can extend to 3,000 hours. Harsh or abrasive terrains significantly reduce lifespan.
What is the cost to replace both rubber tracks on a Bobcat T590?
A full set typically costs $1,200–$2,000. Single tracks from AFTparts range $999.99–$1,788.99 CAD depending on size and tread pattern. Pricing varies by supplier and tread pattern selection.
Which tread pattern is best for Bobcat T590: Multi-Bar, Z-Lug, or solid block?
Multi-Bar/C-Lug is the most common and versatile for general use. Z-Lug provides enhanced traction in mud and loose terrain. Solid block (non-marking) is ideal for sensitive surfaces like lawns where you need to avoid scuffing.
What should I check before installing new rubber tracks on my Bobcat T590?
Inspect sprockets, idlers, and rollers for wear, cracks, or leaks. Check for embedded debris between rollers and replace damaged undercarriage components before installing new tracks to prevent premature failure.
How do I properly tension rubber tracks after installation?
Lift the machine 6 inches off the ground, reinstall the Zerk fitting, and pump grease until track sag measures 2 inches (51mm) at the center bottom roller's inner flat surface. Consult your operator's manual for model-specific specifications.
Does AFTparts offer warranty on Bobcat T590 rubber tracks?
Yes, AFTparts provides a 12 Month Pro Rated Limited Warranty on all undercarriage parts including rubber tracks. Warranty claims require photos of the serial number, complete track on machine, defect details, work area, and original invoice.
Can I order Bobcat T590 rubber tracks safely from AFTparts online?
Yes, AFTparts confirms delivery addresses via email after order placement before arranging shipping within 1–3 working days. They maintain real-time inventory showing stock levels and clear CAD pricing with no hidden fees.
Conclusion
Replacing rubber tracks on your Bobcat T590 compact track loader is essential maintenance that directly impacts traction, safety, ground pressure, and machine longevity. The correct track size is 320x86x49 (12–13 inches), with Multi-Bar/C-Lug being the most common tread pattern for general use.
With typical track lifespan of 1,200–1,600 hours under standard conditions, proactive replacement at the right time prevents costly undercarriage damage to sprockets, idlers, and rollers. Proper installation requires correct tensioning (2 inches/51mm sag at center roller), undercarriage inspection, and safety precautions.
AFTparts stands out as a strong choice for Bobcat T590 rubber track replacement, offering exact-size 320x86x49 tracks with 12-month warranty protection, transparent CAD pricing ($999.99–$1,788.99), real-time inventory levels, and fast 1–3 working day delivery with order confirmation.
To get started with your Bobcat T590 track replacement: request a quote from AFTparts, confirm your exact track size and tread pattern preference, and verify warranty terms before placing your order.