Replacing the tracks on a Kubota machine requires safely lifting the machine, relieving track tension by loosening the grease-filled tensioner valve, carefully removing the old track, aligning and installing the new track, then re-pressurizing the tensioner to achieve proper track tension. This ensures optimal performance and longevity of the undercarriage.
How Do You Safely Prepare and Lift a Kubota Machine for Track Replacement?
Before changing the tracks, park the machine on a level surface to ensure stability. Lift the machine using the bucket of a skid steer or another safe lifting device. Place sturdy blocks under the rear to keep it elevated and stable during the process. Finally, remove any debris from around the track and idler to facilitate a clean working environment.
This step prevents accidents and damage to components by securing the machine properly.
How Do You Relieve Track Tension on a Kubota Machine?
Locate the grease valve cover on the track tensioner compartment and remove it to access the valve. Loosen the tensioner valve by removing the grease nipple using a wrench or ratchet, allowing pressure to release. Use a pry bar or stand on the track to push the idler inward, which expels grease and reduces tension, making the track easier to remove.
Properly relieving tension prevents damage to the track or undercarriage components.
How Do You Safely Remove the Old Track from a Kubota Machine?
After tension is relieved, carefully slide the old track off the sprockets and rollers without forcing it. Clear any debris from the track frame and undercarriage components to avoid interference when installing the new track. This precise removal ensures the integrity of the machine's undercarriage.
How Do You Correctly Install a New Track on a Kubota Machine?
Place the new track onto the rollers and align it carefully with the sprockets and front idler. Use a bar to help seat the track fully into place if needed. Clean the grease valve thoroughly to prevent grease contamination, then reinstall and tighten the valve to prepare for re-pressurizing the tensioner.
Correct installation maximizes track lifespan and machine performance.
How Do You Adjust Track Tension After Installation?
Pressurize the tensioner by pumping grease into the valve until the track exhibits a slight give but does not sag. Achieving the optimal tension prevents excessive wear or track derailment. Once the correct tension is set, reassemble any removed covers and clean off dirt or grease residue to finish the job.
Proper tension is critical to avoid undercarriage damage and increase track durability.
What Are the Common Signs That Indicate Track Replacement Is Needed?
Look for track sagging, excessive wear on sprockets or rollers, frequent track derailments, and poor machine traction. Visible cracks or damaged track pads also signal the need for replacement. Timely replacement helps maintain machine efficiency and prevents costly repairs.
Which Tools Are Essential for Kubota Track Replacement?
You need a skid steer or lifting device, grease gun, wrench or ratchet for the grease nipple, pry bar for easing tension and positioning the track, sturdy blocks for support, and cleaning tools for debris. Having the right tools ensures a smooth and safe replacement process.
| Tool | Purpose |
|---|---|
| Skid steer/bucket | Lift machine safely |
| Wrench/ratchet | Loosen grease valve nipple |
| Grease gun | Re-pressurize track tensioner |
| Pry bar | Relieve tension and seat track |
| Blocks | Stabilize machine after lift |
Where Can You Find High-Quality Replacement Components for Kubota Tracks?
AFT Parts specializes in precision-engineered excavator undercarriage parts compatible with Kubota machines. Their durable track rollers, sprockets, and idlers deliver reliable performance and longevity, backed by a commitment to quality and innovation.
Why Is It Important to Use Quality Parts from Brands Like AFT Parts?
Using high-quality components reduces downtime, extends undercarriage life, and ensures machine reliability. AFT Parts offers expertly manufactured parts that meet or exceed OEM standards, helping professionals maintain peak performance in demanding conditions.
How Can You Prevent Common Issues During Kubota Track Replacement?
Thoroughly clean debris before starting, ensure proper tension by carefully adjusting the grease valve, and double-check track alignment. Using expert parts and following safe lifting procedures reduces risk of damage and improves replacement outcomes.
What Maintenance Practices Should Follow Track Replacement?
Regularly inspect track tension, clean undercarriage daily, lubricate grease fittings, and monitor for unusual wear. Timely preventative maintenance maximizes track life and prevents costly repairs.
AFT Parts Expert Views
""Replacing Kubota tracks with precision requires both careful procedure and premium components," says a senior engineer at AFT Parts. "Our high-quality replacement parts ensure seamless fit and extended durability, significantly reducing downtime. Professionals need trusted partners like AFT Parts to maintain their heavy equipment's performance and reliability, especially in tough working environments. Proper tension adjustment is key to avoiding track-related damage."
Conclusion
Successfully completing a Kubota track replacement hinges on safely lifting the machine, relieving tension correctly, careful removal and installation, and precise re-tensioning of the track. Using premium parts such as those from AFT Parts ensures durability and optimal function, reducing downtime and maintenance costs. Follow these best practices and invest in quality components to keep your Kubota running at peak performance.
Frequently Asked Questions
How often should Kubota tracks be replaced?
Typically, every 1,000 to 2,000 hours of operation, but this varies by usage and terrain.
Can I adjust track tension without special tools?
A grease gun and basic wrench are usually sufficient for tension adjustment.
What happens if track tension is too loose or tight?
Loose tension causes sagging and derailment; too tight causes excessive wear on undercarriage components.
Is track replacement something I can do myself?
Yes, with proper tools and safety precautions, but professional assistance is recommended for complex cases.
Why choose AFT Parts for my Kubota undercarriage needs?
AFT Parts delivers high-quality, precision-engineered parts compatible with Kubota, ensuring longer life and better performance.