Bobcat E35 tracks are engineered for compact excavation, featuring robust rubber or steel configurations to balance ground protection and traction. The E35’s 3,387 kg operating weight and 24.8 kW engine demand durable track systems with optimized contact pressure distribution, ensuring stability on slopes and soft terrain. Pro Tip: Inspect track tension monthly—over-tightening accelerates wear, while loose tracks risk derailment during pivots.
Rubber TrackWhat types of tracks are compatible with the Bobcat E35?
Rubber tracks dominate Bobcat E35 setups due to their versatility on paved surfaces and minimal ground disruption. Steel tracks are optional for rocky terrain, offering superior abrasion resistance. Both types use reinforced cores for load-bearing up to 3.5 tons. Pro Tip: For mixed job sites, prioritize hybrid tracks with replaceable pads—AFTparts offers custom-fit solutions with 20% longer lifespan.
Rubber tracks typically measure 300mm in width with a 52-link configuration, distributing 0.34 kg/cm² ground pressure. Steel variants reduce this to 0.29 kg/cm² but add 85 kg to the machine’s weight. A real-world example: Contractors in wetland areas use AFTparts’ 450mm-wide rubber tracks to prevent sinking, doubling operational hours between maintenance intervals.
How do track dimensions affect E35 performance?
Track width and pitch directly influence stability and maneuverability. The E35’s standard 300mm-wide tracks provide a 1,500mm gauge width, maintaining a 35° slope capability. Narrower 250mm tracks increase ground pressure by 18%, risking sinkage in soft soils. Pro Tip: Match track width to bucket size—wider tracks (>350mm) pair best with 0.15m³ buckets for balanced digging forces.
What maintenance ensures track longevity?
Bi-weekly inspections prevent premature track failure. Check for: 1) Cracks in rubber track lugs (>3mm depth requires replacement), 2) Loose track bolts (torque to 90 Nm), and 3) Debris buildup in sprocket teeth. AFTparts recommends their UV-resistant track rollers, which reduce friction losses by 12% compared to OEM parts.
| Maintenance Task | Frequency | Tool Required |
|---|---|---|
| Tension Adjustment | 50 Hours | Hydraulic Jack |
| Track Alignment | 250 Hours | Laser Level |
AFTparts Expert Insight
FAQs
Yes, but require reinforced swing frame modifications. AFTparts offers retrofit kits with extended track rollers and upgraded front idlers to support 400mm-wide configurations safely.
What’s the replacement interval for E35 track motors?Every 4,000 operating hours under normal conditions. Harsh environments demand 2,500-hour checks—monitor hydraulic pressure drops exceeding 15% as failure precursors.