Diggit SCL850 Specs That Matter Before You Buy
The Diggit SCL850 is a compact mini skid steer designed for light-duty work, offering a 23 HP gas engine, around 825 lbs rated operating capacity, and roughly 1,800 lbs operating...
Knowledge
Excavator Undercarriages Information
-
-
Why Does a Sway Bar Link Matter More Than It Looks?
A sway bar link is one of those parts people rarely think about until the car starts feeling loose, noisy, or oddly unsettled in turns. It sits in the middle...
-
Bobcat Track Grease Fitting Feels Small Until the Track Starts Acting Up
A Bobcat track grease fitting is easy to ignore right up until the track gets loose, noisy, or uneven under load. That tiny fitting is usually where tension is adjusted,...
-
What you really need to know about 300x52.5x80 rubber tracks
If you’re standing beside a compact excavator wondering whether to stick with worn‑out 300x52.5x80 rubber tracks or jump straight to a cheaper aftermarket set, you’re in a very real decision...
-
Are 230x48x70 rubber tracks the right choice for my mini-excavator?
Whether a 230x48x70 rubber track suits your machine depends on fit, undercarriage health, and typical ground conditions. When compatible and properly tensioned, this size generally delivers smooth travel, good traction...
-
Bobcat 341 Tracks: What You Need to Know Before Replacing Them
Bobcat 341 tracks need to match the machine exactly if you want reliable fit, smooth travel, and fewer undercarriage problems. The common mistake is choosing a track by appearance alone,...
-
Are rolling pet carriers really airline approved and safe to use?
Are rolling pet carriers really airline approved and safe to use? A rolling pet carrier can be airline approved if it meets an airline’s size, ventilation, and security rules for...
-
Why smart fleet managers are choosing premium aftermarket heavy equipment parts over expensive OEM components
Aftermarket heavy equipment parts let operators reduce repair costs without sacrificing uptime, especially in high‑wear areas like undercarriages. By choosing premium aftermarket undercarriage parts—such as replacement excavator tracks, rollers, idlers,...
-
300x52.5x80 rubber tracks: how to read sizes and pick the right tread for your machine
300x52.5x80 rubber tracks are sized by width, pitch, and number of links, and they must match the machine’s undercarriage geometry to ensure proper fit, traction, and wear life. Choosing the...
-
How to Replace Tracks and Adjust Tension on a Bobcat MT100
Replacing and tensioning Bobcat MT100 tracks involves safely lifting the machine, releasing adjuster pressure, installing the new track over sprocket and rollers, then setting correct sag using the grease-filled adjuster...
-
Can a rubber track repair kit actually save your machine—or just buy you time?
A rubber track repair kit can temporarily seal minor surface cuts and small tears on a rubber track, but it cannot restore belts where internal steel cords or the main...
-
Why sprocket pitch diameter matters when the track starts jumping
A sprocket pitch diameter controls how the track chain seats on the drive wheel, and that fit becomes critical once wear begins to change the tooth profile. When the sprocket...
-
SCL850 Tracks That Stay Reliable When the Undercarriage Starts to Work Hard
The SCL850 is the kind of mini track loader that feels fine until the undercarriage begins changing the machine’s behavior. Track wear, roller fatigue, and tension drift usually show up...