< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

259D3

(2 products)
View as

Caterpillar 259D3 Undercarriage Parts: Fit, Care and Replacement in Canada

This collection brings together front idlers and drive sprockets whose fitment lists name the Caterpillar 259D3. Fitment lists often span several models, so match your own track stamp or part number before you order.

What fits

  • Front idler — 3041878
  • Sprocket — 3041870

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (259D3).
  • Step 2: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
  • Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.

Reading a rubber track size

A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.

Signs a part is due

  • Sprocket teeth that look hooked or pointed.
  • A track that needs tension more often than before.
  • Flat spots on rollers or noise from the undercarriage.
  • Cuts that expose steel cord.

Before you order

Write down the serial number, the track size and the part numbers you can read. If anything is worn away, take photos; that is usually enough to confirm a listing.

Inspection and Canadian conditions

  • Walk around the machine daily and check the tracks for torn edges and missing lugs.
  • Keep tension to the manual figure; spring and fall temperature swings can move it day to day.
  • Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
  • Look at sprocket teeth for sharpening or hooking.

In winter, clear packed snow, slush and mud from the frame before parking so nothing freezes around the rollers overnight. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.

Replace one part or several?

Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.

Related guides and collections

See Caterpillar hub, idler wear and replacement guide, sprocket wear and replacement guide and Caterpillar rubber tracks guide.

FAQ

How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.

Do parts for related machines fit the Caterpillar 259D3?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...