AFTparts
Sprocket 3041916 || Caterpillar 279C, 289C, 299C, 299D, 299D2, 299D3
$344.00 CADUnit price /UnavailableVery low stock (5 units)AFTparts
Idler 3041878 || Caterpillar 259B3, 259D, 259D3, 279C, 289C, 299C
$670.00 CADUnit price /UnavailableLow stock (13 units)
Caterpillar 299D3 Undercarriage Parts in Canada: What Fits and How to Check
Here you will find front idlers and drive sprockets that our product pages list for the Caterpillar 299D3. Fitment lists often span several models, so match your own track stamp or part number before you order.
What fits
- Front idler ā 3041878
- Sprocket ā 3041916
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (299D3).
- Step 2: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
- Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.
Reading a rubber track size
A track stamp such as 320 Ć 86 Ć 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.
Signs a part is due
- Sprocket teeth that look hooked or pointed.
- A track that needs tension more often than before.
- Flat spots on rollers or noise from the undercarriage.
- Cuts that expose steel cord.
Before you order
Have the model, serial number and the numbers from your old parts ready. Photos of the old track stamp and of the sprocket help when a stamp is worn. Our team uses these details only to confirm fit against parts listed on this store.
Inspection and Canadian conditions
- Walk around the machine daily and check the tracks for torn edges and missing lugs.
- Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
- Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
- Inspect sprocket teeth for hooked or pointed tips.
After snow or mud work, clean the track frame before the machine sits in the cold. On gravel and broken concrete, slow down and avoid spin turns that tear lug edges.
Replace one part or several?
Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.
Related guides and collections
See Caterpillar hub, idler wear and replacement guide, sprocket wear and replacement guide and Caterpillar rubber tracks guide.
FAQ
How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.
Do parts for related machines fit the Caterpillar 299D3?
Only when the product page lists your model. Check each listing and your part number.