< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

Cat D5

(1 products)
View as

Cat D5 Undercarriage Parts: Track Roller Fit and Care in Canada

This AFTparts Canada collection covers undercarriage parts for Caterpillar D5-series crawler dozers. The listing available today is the bottom track roller 124-8237, whose product page names the Cat D5C, D5G and D5M(S). Dozers in this class work hard on Canadian sites, from frozen spring clay to gravel haul roads, and bottom rollers carry the machine's full weight on every pass. Match the number on your old roller before ordering.

What fits

  • Track roller — 124-8237 (listed as 1248237), for Cat D5C, D5G and D5M(S)

The product page lists these three models only. If your machine is another D5 version, check with us before you order.

How to confirm fit

  • Step 1: Read the model on the serial plate and confirm it is a D5C, D5G or D5M(S).
  • Step 2: Clean the old roller and find the cast or stamped part number; compare it with 124-8237.
  • Step 3: Note where the roller sits on the track frame, since some frames mix roller styles along their length.
  • Step 4: Still unsure? Send the serial number, roller number and photos through Check Fitment on Contact Us.

Inspection and Canadian conditions

A D5 often pushes material all day in conditions that are hard on rollers: abrasive sand, packed clay and repeated freeze-thaw. A short walk-around before each shift catches most problems early:

  • Look for rollers that have stopped turning; a seized roller wears a flat spot quickly and loads the track links.
  • Check for oil weeping at the roller seals, a common sign that a roller is near the end of its life.
  • Watch for worn or chipped roller flanges and uneven wear along the frame.
  • Check track tension against the operator's manual; a track that is too tight speeds up roller and link wear.

In winter, clear packed snow, mud and frozen material out of the track frame before parking. Material that freezes overnight around the rollers can stop them turning at the next start. On rocky ground, avoid sharp pivot turns that side-load the roller flanges. The undercarriage inspection and wear measurement guide explains what to measure.

Replace one part or several?

One roller that has failed early, for example from a seal leak, can be replaced on its own. When several rollers are worn to a similar level, replacing them together keeps the track running evenly and avoids putting a new roller next to badly worn neighbours. Measure the idlers, sprocket and track links at the same visit so you can plan the next stage of work.

Related guides and collections

See compatible track rollers for Cat excavators and dozers, the track roller wear and replacement guide and the 124-8237 track roller page. Browse more parts in the Caterpillar hub.

FAQ

Which D5 models does roller 124-8237 fit?
Its product page lists the Cat D5C, D5G and D5M(S).

Can I order by machine model alone?
It is safer to match the number on your current roller, as undercarriage parts can change between versions.

Is this an original Caterpillar part?
It is an aftermarket roller listed by part number 124-8237. Confirm fit by number before ordering.

Compare /3

Loading...