No products found
Enteco Undercarriage Parts: Fitment Help
We do not currently list a part whose product page names a Enteco machine. This page explains how to identify the undercarriage parts your machine needs so our team can check whether an equivalent we stock is a match. We will not guess at fitment; every match is confirmed by size or part number.
What to send us
- The model and serial number from the machine's plate.
- For rubber tracks, the size moulded inside the track: width, pitch and number of links.
- For rollers, idlers and sprockets, any number cast or stamped on the part, plus tooth and bolt-hole counts for sprockets.
- Photos of the old parts if numbers are worn. Send everything through Check Fitment on Contact Us.
Reading a rubber track size
Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.
Signs a part is due
- Tracks that slip or jump on the sprocket under load.
- Rollers that leak oil or no longer turn freely.
- Idler flanges worn thin on one side.
- Lugs cracked down to the cords.
Before you order
Write down the serial number, the track size and the part numbers you can read. If anything is worn away, take photos; that is usually enough to confirm a listing.
Storage and off-season care
Before laying a machine up for the season, clean the undercarriage, back off tension as the manual allows and park on firm, dry ground. Re-check tension and look the tracks over when it returns to work.
Undercarriage parts at a glance
The sprocket drives the track, the front idler guides it and holds tension, bottom rollers carry the load and carrier rollers hold up the upper run. Because each is numbered separately, matching by number avoids most ordering mistakes.
Choosing a tread pattern
Where more than one tread is offered for the same size, the fit is the same and the choice comes down to the work. Many owners simply reorder the pattern they already run, which keeps handling familiar.
Inspection before you order
Check track sag against the operator manual, look for exposed cords or missing lugs, and spin-check rollers for leaks or flat spots. In Canadian winters, clean packed snow and mud from the frame before parking so it does not freeze around the rollers.
Related guides and collections
See undercarriage parts by machine guide.
FAQ
Do you have parts for the Enteco?
Not as a named listing today. Send your sizes and part numbers and we will check whether a stocked part matches.
Can I order by machine model alone?
It is safer to order by track size or part number, because machines can change undercarriage between series.