No products found
Geoprobe Undercarriage Parts: Fitment Help
We do not currently list a part whose product page names a Geoprobe machine. This page explains how to identify the undercarriage parts your machine needs so our team can check whether an equivalent we stock is a match. We will not guess at fitment; every match is confirmed by size or part number.
What to send us
- The model and serial number from the machine's plate.
- For rubber tracks, the size moulded inside the track: width, pitch and number of links.
- For rollers, idlers and sprockets, any number cast or stamped on the part, plus tooth and bolt-hole counts for sprockets.
- Photos of the old parts if numbers are worn. Send everything through Check Fitment on Contact Us.
Reading a rubber track size
Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.
Signs a part is due
- Tracks that slip or jump on the sprocket under load.
- Rollers that leak oil or no longer turn freely.
- Idler flanges worn thin on one side.
- Lugs cracked down to the cords.
Before you order
Write down the serial number, the track size and the part numbers you can read. If anything is worn away, take photos; that is usually enough to confirm a listing.
Storage and off-season care
For seasonal storage, wash out the frame, ease off track tension as the manual permits and keep the machine off soft or frozen ground. Inspect everything again before the next job.
Undercarriage parts at a glance
Track rollers carry the machine's weight along the bottom of the track frame. Carrier rollers support the top run of the track. The front idler guides the track and works with the tensioner, and the drive sprocket turns the track. Each has its own part number, which is the surest way to match a replacement.
Choosing a tread pattern
If a size is offered in several treads, all of them fit the same machine; pick the one that suits your ground, or stay with the pattern you have now.
Inspection before you order
Note any cracked lugs, weeping roller seals or pointed sprocket teeth; these tell you which parts are due together. In Canadian winters, clean packed snow and mud from the frame before parking so it does not freeze around the rollers.
Related guides and collections
See undercarriage parts by machine guide.
FAQ
Do you have parts for the Geoprobe?
Not as a named listing today. Send your sizes and part numbers and we will check whether a stocked part matches.
Can I order by machine model alone?
It is safer to order by track size or part number, because machines can change undercarriage between series.