< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

T25

(0 products)
View as

No products found

T25 Undercarriage Parts: Fitment Help

We do not currently list a part whose product page names the T25. This page explains how to identify the undercarriage parts your machine needs so our team can check whether an equivalent we stock is a match. We will not guess at fitment; every match is confirmed by size or part number.

What to send us

  • The model and serial number from the machine's plate.
  • For rubber tracks, the size moulded inside the track: width, pitch and number of links.
  • For rollers, idlers and sprockets, any number cast or stamped on the part, plus tooth and bolt-hole counts for sprockets.
  • Photos of the old parts if numbers are worn. Send everything through Check Fitment on Contact Us.

Reading a rubber track size

A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.

Signs a part is due

  • Tracks that slip or jump on the sprocket under load.
  • Rollers that leak oil or no longer turn freely.
  • Idler flanges worn thin on one side.
  • Lugs cracked down to the cords.

Before you order

Gather the machine serial, the track stamp and any cast numbers on the steel parts. With those details, fit can be checked against store listings instead of being guessed.

Storage and off-season care

Before laying a machine up for the season, clean the undercarriage, back off tension as the manual allows and park on firm, dry ground. Re-check tension and look the tracks over when it returns to work.

Undercarriage parts at a glance

Track rollers carry the machine's weight along the bottom of the track frame. Carrier rollers support the top run of the track. The front idler guides the track and works with the tensioner, and the drive sprocket turns the track. Each has its own part number, which is the surest way to match a replacement.

Choosing a tread pattern

If a size is offered in several treads, all of them fit the same machine; pick the one that suits your ground, or stay with the pattern you have now.

Inspection before you order

Look at sprocket teeth for hooking, check idlers for one-sided flange wear and measure track sag as the manual describes. In Canadian winters, clean packed snow and mud from the frame before parking so it does not freeze around the rollers.

Related guides and collections

See undercarriage parts by machine guide.

FAQ

Do you have parts for the T25?
Not as a named listing today. Send your sizes and part numbers and we will check whether a stocked part matches.

Can I order by machine model alone?
It is safer to order by track size or part number, because machines can change undercarriage between series.

Compare /3

Loading...