< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

TB138FR

(3 products)
View as

Takeuchi TB138FR Undercarriage Parts: Sizes, Part Numbers and Care

AFTparts Canada lists track rollers, front idlers and drive sprockets for the Takeuchi TB138FR on this page, each matched to the machine by its product page. Many of these parts are shared with related machines, so confirm with the size or number on the part you are replacing.

What fits

  • Track roller — 04313-11100
  • Front idler — 03714-00000
  • Sprocket — 0471000600

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (TB138FR).
  • Step 2: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
  • Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If a number is worn away, measure the part and send photos so we can compare it with stocked listings.

Reading a rubber track size

The size moulded inside a track gives width, pitch and link count. Treat any letter code as the tread pattern; the three numbers are what must match your machine.

Signs a part is due

  • Tracks that slip or jump on the sprocket under load.
  • Rollers that leak oil or no longer turn freely.
  • Idler flanges worn thin on one side.
  • Lugs cracked down to the cords.

Before you order

Gather the machine serial, the track stamp and any cast numbers on the steel parts. With those details, fit can be checked against store listings instead of being guessed.

Inspection and Canadian conditions

  • Check both tracks for chunking, cracks at the lug base and visible steel cord.
  • Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
  • Spin-check visible rollers and look for flat spots or leaking seals.
  • Look at sprocket teeth for sharpening or hooking.

In winter, clear packed snow, slush and mud from the frame before parking so nothing freezes around the rollers overnight. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.

Replace one part or several?

Track, rollers, idler and sprocket wear as a set. A new track on hooked teeth or a seized roller wears out early, so measure everything at the same visit and replace parts with similar wear together.

Related guides and collections

See Takeuchi hub, track roller wear and replacement guide, idler wear and replacement guide and sprocket wear and replacement guide.

FAQ

How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.

Do parts for related machines fit the Takeuchi TB138FR?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...