AFTparts
Bobcat T180, T190, T550, T590, T595 ‖ Rubber Tracks ‖ 320x86Bx49
$1,259.99 CAD$1,279.99Unit price /UnavailableVery low stock (1 unit)AFTparts
Sprocket 3041870 || Cat 259B3, 259D, 239D, 249D, 239D3
$459.99 CADUnit price /UnavailableLow stock (14 units)AFTparts
Bobcat 239D, 239D3,249D, 249D3, T180, T190 ‖ Rubber Tracks ‖ 400x86x49
$1,119.99 CADUnit price /Unavailable
Caterpillar 239D3 Undercarriage Parts: Fit, Care and Replacement in Canada
This AFTparts Canada collection groups rubber tracks and drive sprockets whose product pages list the Caterpillar 239D3. Fitment lists often span several models, so match your own track stamp or part number before you order.
What fits
- Rubber tracks — 400 × 86 × 49 — fits by size, 320 × 86 × 49 (B tread) — fits by size (width × pitch × links)
- Sprocket — 3041870
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (239D3).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
More than one rubber tracks number is listed here. They are separate listings, so read the number on your current part rather than judging by shape or colour. If a number is worn away, measure the part and send photos so we can compare it with stocked listings.
About tracks that fit by size
Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.
Reading a rubber track size
A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.
Inspection and Canadian conditions
- Check both tracks for chunking, cracks at the lug base and visible steel cord.
- Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
- Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
- Look at sprocket teeth for sharpening or hooking.
After snow or mud work, clean the track frame before the machine sits in the cold. On rocky or demolition ground, avoid sharp counter-rotation turns.
Replace one part or several?
Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.
Related guides and collections
See Caterpillar hub, rubber track sizing and fitment guide, sprocket wear and replacement guide, Caterpillar rubber tracks guide and all rubber tracks.
FAQ
Which track sizes are listed for the Caterpillar 239D3?
400 × 86 × 49, 320 × 86 × 49. Match the size stamped inside your current track.
How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.
Do parts for related machines fit the Caterpillar 239D3?
Only when the product page lists your model. Check each listing and your part number.