A rubber track fits only when its width, pitch and link count match the undercarriage, and the machine serial number confirms the correct fitment. Start with the code moulded into the old belt, verify the three dimensions, and treat a model-name lookup as confirmation rather than proof. This sub-hub gathers the sizing and compatibility guidance from the wider Rubber Tracks Guide.
Last updated:
Read the three-part size code before searching by model
A code such as 400x86x52 means 400 mm width, 86 mm pitch and 52 links; all three values must match the intended undercarriage.
Pitch controls how the drive lugs engage the sprocket, and link count controls the belt circumference. Width affects clearance and ground pressure, but it is not automatically interchangeable. Record the complete code, including any letters attached to the pitch or tread designation. A listing that matches only the machine model can still be wrong when the manufacturer offered more than one undercarriage option.
- How to Measure Rubber Track Pitch and Link Count for Perfect Excavator Fit?
- Bobcat T250 & T300 Rubber Tracks: The Ultimate Replacement and Sizing Guide
- How Do You Accurately Measure the Rubber Track (La Chenille) of a Mini Excavator?
- How Do You Measure Rubber Track Size?
- How to Measure Rubber Tracks for Accurate Replacement?
Measure an unreadable track in a fixed order
Measure width first, pitch between matching points on adjacent drive lugs, then count every drive lug once around the belt.
Clean a short section before measuring so packed material does not shift the reading. Use millimetres and repeat the pitch measurement across several lugs when wear makes one interval uncertain. Mark the first lug before counting to avoid adding or losing one. If the track is damaged or stretched, the machine parts book and serial number should settle any conflict with the measured value.
- How to Measure Rubber Tracks for Any Machine?
- How to Measure Rubber Tracks for Mini Excavator & Skid Steer
- How to Measure the Track Width for Your Rubber Track?
- The Engineer’s Guide to Rubber Track Sizing: Pitch, Width, Links Explained
- What Are the Best Rubber Track Pitch and Width for Construction Equipment?
Use the serial number to resolve model-year variations
The badge on the machine identifies a family; the serial number identifies the build configuration that determines the correct track.
Compact loaders and mini excavators are often sold with narrow and wide track options, and a model can change undercarriage specifications during its production run. Give the supplier the full serial number and the old track code. When those sources disagree, stop the order and request a written fitment cross-reference rather than choosing the closest dimension.
- What Are The Dimensions Of 230x48x70 Rubber Track?
- What Does 400x72 5x74 Track Size Mean?
- What Does 400x72.5x74 Rubber Tracks Measurement Mean?
- What Does 400x86x52 Size Mean For Rubber Tracks?
- What Is the Significance of Pitch in Rubber Track Selection?
Treat letters in the code as part of the fitment
Letters beside the pitch can describe the drive-lug geometry or tread family, so a numeric match alone may not establish compatibility.
Two belts can share width, pitch and link count while using a different internal drive pattern. Compare the centre-guide shape, sprocket engagement and manufacturer cross-reference. Tread style may be selectable for the jobsite, but the drive-lug geometry is not. Ask the seller to state the supplied code in writing before shipment.
- Complete Excavator Rubber Track Assembly Kits in Ontario: Ensuring Fit, Durability, and Performance
- How Do You Fit Rubber Tracks 450x86Bx55?
- How does AFT Parts verify rubber track compatibility across brands in Ontario?
- How to Determine If a Doosan Rubber Track Fits My Excavator Model?
- How to Find the Right Size Rubber Tracks for Your Equipment in Alberta?
Complete a five-point check before placing the order
Confirm size code, machine model, serial number, drive-lug profile and clearance before approving a replacement rubber track.
Photograph the old marking and both sides of the undercarriage. Note whether the existing belt runs close to the frame, guards or rollers, because a wider alternative may rub even when the pitch and link count fit. Record the work surface and preferred tread separately from the fitment facts. This creates a purchase record that can be checked before freight and installation make a return difficult.
- How to Fit Rubber Tracks 180x60x37?
- Is There A Komatsu Rubber Track Assembly Compatible With My Machine?
- What Are Rubber Tracks 300x52.5Nx74 Compatible with Bobcat Excavators?
- What Are Rubber Tracks 300x52.5Nx86 Compatible With?
- What Are Rubber Tracks 320x86Nx50 Compatible With?
FAQ
What do the three numbers on a rubber track mean?
They normally identify width in millimetres, pitch in millimetres and the number of links. Confirm the exact convention for the track and machine before ordering.
Can two rubber tracks with the same dimensions fit different machines?
Yes. Drive-lug geometry, guide arrangement and available clearance can differ even when the three main numbers match. Use the serial number and a written fitment cross-reference.
Should I measure a stretched or damaged rubber track?
Measure it as a reference, but do not rely on that measurement alone. Compare the moulded code, machine parts information and serial-number fitment data.
Can I choose a wider rubber track for lower ground pressure?
Only when the machine maker or fitment data lists that width for the exact configuration. Check frame, guard, roller and sprocket clearance before changing width.
What should I send a supplier for a fitment check?
Send the complete track code, machine make and model, serial number, photographs of the old track and undercarriage, and any part number shown in the machine manual.
Continue from the guide that matches the next decision
Use the product collection only after the size and condition checks are complete. The brand collections help confirm model families, while the main rubber-track hub connects the rest of the maintenance and buying guidance.
Shop rubber tracks
Browse the complete rubber-track collection.
Bobcat parts and tracks
Check Bobcat model and fitment listings.
Caterpillar parts and tracks
Review Caterpillar machine collections.
Kubota parts and tracks
Find Kubota model-specific options.
Rubber Tracks Guide
Return to the complete rubber-track decision path.
More in this cluster
- Ultimate Guide to Rubber Excavator Tracks for Mini and Full-Size Diggers
- How to Measure Track Link Pitch for Your Excavator?
- What Are 300x52.5x80 Tracks and How Do They Perform?
- What Size Are Bobcat S70 Tracks And How To Replace?
- What Does 450x83.5x74 Track Specification Mean?
- What Size Track Fits A Bobcat 331 Excavator?
- What Are The Specifications Of 257B Tracks?
- What Does 300x52 5Nx80 Mean For Rubber Tracks?
- Which Kubota KX121 2 Rubber Tracks Are The Best Fit?
- What Are the Specifications and Benefits of 259D CAT Tracks?
- What Are the Standard Dimensions of a Mini Excavator Track?
- What Size Mini Ex Track Do I Need?
- What Are 450x86x56 Tracks Used For?
- What Sizes Are Mini Excavator Tracks Available In?



