< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

25

(3 products)
View as

IHI 25 Undercarriage Parts: Fit, Care and Replacement in Canada

This AFTparts Canada collection groups rubber tracks and track pads whose product pages list the IHI 25. Fitment lists often span several models, so match your own track stamp or part number before you order.

What fits

  • Rubber tracks — 300 × 52.5 × 78 (N, W tread) — fits by size (width × pitch × links)
  • Track pads — Rubber Pad ‖ 300MM Rubber Pad (Bolt On) Part Number DHR101X300B

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (25NX, 25NX-2, 25VX, 25VX.2).
  • Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
  • Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If a number is worn away, measure the part and send photos so we can compare it with stocked listings.

About tracks that fit by size

Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.

Reading a rubber track size

Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.

Inspection and Canadian conditions

  • Walk around the machine daily and check the tracks for torn edges and missing lugs.
  • Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
  • Watch for seized or wobbling rollers and uneven idler wear.
  • Inspect sprocket teeth for hooked or pointed tips.

Before an overnight freeze, dig out clay and snow from the undercarriage; frozen build-up strains the track at the next start. On rocky or demolition ground, avoid sharp counter-rotation turns.

Replace one part or several?

Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.

Related guides and collections

See IHI hub, rubber track sizing and fitment guide and all rubber tracks.

FAQ

Which track sizes are listed for the IHI 25?
300 × 52.5 × 78. Confirm it against the stamp inside your track.

Do parts for related machines fit the IHI 25?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...