AFTparts
Sprocket 3041870 || Cat 259B3, 259D, 239D, 249D, 239D3
$459.99 CADUnit price /UnavailableVery low stock (6 units)AFTparts
Idler 3041878 || Caterpillar 259B3, 259D, 259D3, 279C, 289C, 299C
$670.00 CADUnit price /UnavailableLow stock (13 units)AFTparts
AFTParts Rubber Tracks 320x86Qx53
$1,250.00 CADUnit price /UnavailableVery low stock (2 units)AFTparts
CAT 259B, 259B3, 259D ‖ Rubber Tracks ‖ 320x86ZZx53B
$1,274.99 CADUnit price /Unavailable
Caterpillar 259B3 Undercarriage Parts: Fit, Care and Replacement in Canada
Here you will find rubber tracks, front idlers and drive sprockets that our product pages list for the Caterpillar 259B3. Because several listings cover more than one machine, the part number on your old component is the safest guide.
What fits
- Rubber tracks — 320 × 86 × 53 (Q, ZZ tread) — fits by size (width × pitch × links)
- Front idler — 3041878
- Sprocket — 3041870
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (259B3).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.
About tracks that fit by size
Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.
Reading a rubber track size
The size moulded inside a track gives width, pitch and link count. Treat any letter code as the tread pattern; the three numbers are what must match your machine.
Inspection and Canadian conditions
- Walk around the machine daily and check the tracks for torn edges and missing lugs.
- Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
- Watch for seized or wobbling rollers and uneven idler wear.
- Look at sprocket teeth for sharpening or hooking.
Before an overnight freeze, dig out clay and snow from the undercarriage; frozen build-up strains the track at the next start. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.
Replace one part or several?
Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.
Related guides and collections
See Caterpillar hub, Why Use Cat 259B3 Tracks For Loaders, rubber track sizing and fitment guide, idler wear and replacement guide, sprocket wear and replacement guide, Caterpillar rubber tracks guide and all rubber tracks.
FAQ
Which track sizes are listed for the Caterpillar 259B3?
320 × 86 × 53. Confirm it against the stamp inside your track.
How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.
Do parts for related machines fit the Caterpillar 259B3?
Only when the product page lists your model. Check each listing and your part number.