AFTparts
Sprocket 3041870 || Cat 259B3, 259D, 239D, 249D, 239D3
$459.99 CADUnit price /UnavailableLow stock (14 units)AFTparts
Idler 3041878 || Caterpillar 259B3, 259D, 259D3, 279C, 289C, 299C
$670.00 CADUnit price /UnavailableLow stock (13 units)AFTparts
AFTParts Rubber Tracks 320x86Qx53
$1,250.00 CADUnit price /UnavailableVery low stock (2 units)AFTparts
CAT 259B, 259B3, 259D ‖ Rubber Tracks ‖ 320x86ZZx53B
$1,274.99 CADUnit price /Unavailable
Caterpillar 259D Undercarriage Parts: Sizes, Part Numbers and Care
AFTparts Canada lists rubber tracks, front idlers and drive sprockets for the Caterpillar 259D on this page, each matched to the machine by its product page. Fitment lists often span several models, so match your own track stamp or part number before you order. Models named on these listings include 259D, 259D3.
What fits
- Rubber tracks — 320 × 86 × 53 (Q, ZZ tread) — fits by size (width × pitch × links)
- Front idler — 3041878
- Sprocket — 3041870
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (259D, 259D3).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. Where the stamp is unreadable, photos and measurements let our team compare the part before you order.
About tracks that fit by size
A few tracks here carry another brand's name in the title. These fit by size, not as OEM parts, so compare width, pitch and link count with your old track before ordering.
Reading a rubber track size
Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.
Inspection and Canadian conditions
- Check both tracks for chunking, cracks at the lug base and visible steel cord.
- Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
- Spin-check visible rollers and look for flat spots or leaking seals.
- Inspect sprocket teeth for hooked or pointed tips.
Before an overnight freeze, dig out clay and snow from the undercarriage; frozen build-up strains the track at the next start. On rocky or demolition ground, avoid sharp counter-rotation turns.
Replace one part or several?
Track, rollers, idler and sprocket wear as a set. A new track on hooked teeth or a seized roller wears out early, so measure everything at the same visit and replace parts with similar wear together.
Related guides and collections
See Caterpillar hub, What Are the Specifications and Benefits of 259D CAT Tracks, How Can a High-Quality Sprocket Upgrade Maximize the Performance of Your CAT 259D Track Loader, rubber track sizing and fitment guide, idler wear and replacement guide, Caterpillar rubber tracks guide and all rubber tracks.
FAQ
Which track sizes are listed for the Caterpillar 259D?
320 × 86 × 53. Confirm it against the stamp inside your track.
How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.
Do parts for related machines fit the Caterpillar 259D?
Only when the product page lists your model. Check each listing and your part number.