AFTparts
Sprocket 3041916 || Caterpillar 279C, 289C, 299C, 299D, 299D2, 299D3
$344.00 CADUnit price /UnavailableVery low stock (5 units)AFTparts
Idler 3041878 || Caterpillar 259B3, 259D, 259D3, 279C, 289C, 299C
$670.00 CADUnit price /UnavailableLow stock (13 units)AFTparts
Caterpillar 279C, 289C, 289D, 299C, 299D ‖ Rubber Tracks ‖ 450x86ZZx60B
$2,291.99 CADUnit price /UnavailableVery low stock (5 units)
Caterpillar 279C Undercarriage Parts: Matching Parts by Number
Here you will find rubber tracks, front idlers and drive sprockets that our product pages list for the Caterpillar 279C. Because several listings cover more than one machine, the part number on your old component is the safest guide.
What fits
- Rubber tracks — 450 × 86 × 60 (ZZ tread) (width × pitch × links)
- Front idler — 3041878
- Sprocket — 3041916
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (279C).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.
Reading a rubber track size
A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.
Signs a part is due
- Uneven idler wear or a wobbling idler.
- Seized or leaking rollers.
- Missing or torn lugs on the track.
- Teeth on the sprocket worn to sharp tips.
Before you order
Write down the serial number, the track size and the part numbers you can read. If anything is worn away, take photos; that is usually enough to confirm a listing.
Inspection and Canadian conditions
- Walk around the machine daily and check the tracks for torn edges and missing lugs.
- Keep tension to the manual figure; spring and fall temperature swings can move it day to day.
- Watch for seized or wobbling rollers and uneven idler wear.
- Inspect sprocket teeth for hooked or pointed tips.
Before an overnight freeze, dig out clay and snow from the undercarriage; frozen build-up strains the track at the next start. On rocky or demolition ground, avoid sharp counter-rotation turns.
Replace one part or several?
When one component is clearly worn, check the rest. Fitting a new track on a worn sprocket shortens its life; matched replacement usually gives more even wear.
Related guides and collections
See Caterpillar hub, rubber track sizing and fitment guide, idler wear and replacement guide, sprocket wear and replacement guide, Caterpillar rubber tracks guide and all rubber tracks.
FAQ
Which track sizes are listed for the Caterpillar 279C?
450 × 86 × 60. Confirm it against the stamp inside your track.
How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.
Do parts for related machines fit the Caterpillar 279C?
Only when the product page lists your model. Check each listing and your part number.