< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

289C

(3 products)
View as

Caterpillar 289C Undercarriage Parts in Canada: What Fits and How to Check

AFTparts Canada lists rubber tracks, front idlers and drive sprockets for the Caterpillar 289C on this page, each matched to the machine by its product page. Because several listings cover more than one machine, the part number on your old component is the safest guide.

What fits

  • Rubber tracks — 450 × 86 × 60 (ZZ tread) (width × pitch × links)
  • Front idler — 3041878
  • Sprocket — 3041916

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (289C).
  • Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
  • Step 3: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.

Reading a rubber track size

Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.

Signs a part is due

  • Tracks that slip or jump on the sprocket under load.
  • Rollers that leak oil or no longer turn freely.
  • Idler flanges worn thin on one side.
  • Lugs cracked down to the cords.

Inspection and Canadian conditions

  • Walk around the machine daily and check the tracks for torn edges and missing lugs.
  • Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
  • Watch for seized or wobbling rollers and uneven idler wear.
  • Inspect sprocket teeth for hooked or pointed tips.

In winter, clear packed snow, slush and mud from the frame before parking so nothing freezes around the rollers overnight. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.

Replace one part or several?

Track, rollers, idler and sprocket wear as a set. A new track on hooked teeth or a seized roller wears out early, so measure everything at the same visit and replace parts with similar wear together.

Related guides and collections

See Caterpillar hub, CAT 259D, 289C, and 299D: Solving Drive Sprocket Wear in CTL Machines, rubber track sizing and fitment guide, idler wear and replacement guide, sprocket wear and replacement guide, Caterpillar rubber tracks guide and all rubber tracks.

FAQ

Which track sizes are listed for the Caterpillar 289C?
450 × 86 × 60. Confirm it against the stamp inside your track.

How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.

Do parts for related machines fit the Caterpillar 289C?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...