AFTparts
Sprocket 3041916 || Caterpillar 279C, 289C, 299C, 299D, 299D2, 299D3
$344.00 CADUnit price /UnavailableVery low stock (5 units)AFTparts
Idler 3041878 || Caterpillar 259B3, 259D, 259D3, 279C, 289C, 299C
$670.00 CADUnit price /UnavailableLow stock (13 units)AFTparts
Caterpillar 279C, 289C, 289D, 299C, 299D ‖ Rubber Tracks ‖ 450x86ZZx60B
$2,291.99 CADUnit price /UnavailableVery low stock (5 units)
Caterpillar 299C Undercarriage Parts: Fit, Care and Replacement in Canada
This AFTparts Canada collection groups rubber tracks, front idlers and drive sprockets whose product pages list the Caterpillar 299C. Because several listings cover more than one machine, the part number on your old component is the safest guide.
What fits
- Rubber tracks — 450 × 86 × 60 (ZZ tread) (width × pitch × links)
- Front idler — 3041878
- Sprocket — 3041916
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (299C).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.
Reading a rubber track size
A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.
Signs a part is due
- Tracks that slip or jump on the sprocket under load.
- Rollers that leak oil or no longer turn freely.
- Idler flanges worn thin on one side.
- Lugs cracked down to the cords.
Before you order
Write down the serial number, the track size and the part numbers you can read. If anything is worn away, take photos; that is usually enough to confirm a listing.
Inspection and Canadian conditions
- Walk around the machine daily and check the tracks for torn edges and missing lugs.
- Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
- Spin-check visible rollers and look for flat spots or leaking seals.
- Check the sprocket for thin, hooked teeth.
After snow or mud work, clean the track frame before the machine sits in the cold. On rocky or demolition ground, avoid sharp counter-rotation turns.
Replace one part or several?
When one component is clearly worn, check the rest. Fitting a new track on a worn sprocket shortens its life; matched replacement usually gives more even wear.
Related guides and collections
See Caterpillar hub, rubber track sizing and fitment guide, idler wear and replacement guide, sprocket wear and replacement guide, Caterpillar rubber tracks guide and all rubber tracks.
FAQ
Which track sizes are listed for the Caterpillar 299C?
450 × 86 × 60. Confirm it against the stamp inside your track.
How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.
Do parts for related machines fit the Caterpillar 299C?
Only when the product page lists your model. Check each listing and your part number.