AFTparts
Sprocket 3041916 || Caterpillar 279C, 289C, 299C, 299D, 299D2, 299D3
$344.00 CADUnit price /UnavailableVery low stock (5 units)AFTparts
Idler 3041878 || Caterpillar 259B3, 259D, 259D3, 279C, 289C, 299C
$670.00 CADUnit price /UnavailableLow stock (13 units)AFTparts
Caterpillar 279C, 289C, 289D, 299C, 299D ‖ Rubber Tracks ‖ 450x86ZZx60B
$2,291.99 CADUnit price /UnavailableVery low stock (5 units)
Caterpillar 299D Undercarriage Parts: Fit, Care and Replacement in Canada
This AFTparts Canada collection groups rubber tracks, front idlers and drive sprockets whose product pages list the Caterpillar 299D. Many of these parts are shared with related machines, so confirm with the size or number on the part you are replacing. Models named on these listings include 299D, 299D2, 299D3.
What fits
- Rubber tracks — 450 × 86 × 60 (ZZ tread) (width × pitch × links)
- Front idler — 3041878
- Sprocket — 3041916
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (299D, 299D2, 299D3).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Match the number cast or stamped on the roller, idler or sprocket, and count sprocket teeth and bolt holes.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. Where the stamp is unreadable, photos and measurements let our team compare the part before you order.
Reading a rubber track size
A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.
Signs a part is due
- Sprocket teeth that look hooked or pointed.
- A track that needs tension more often than before.
- Flat spots on rollers or noise from the undercarriage.
- Cuts that expose steel cord.
Inspection and Canadian conditions
- Check both tracks for chunking, cracks at the lug base and visible steel cord.
- Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
- Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
- Look at sprocket teeth for sharpening or hooking.
After snow or mud work, clean the track frame before the machine sits in the cold. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.
Replace one part or several?
Track, rollers, idler and sprocket wear as a set. A new track on hooked teeth or a seized roller wears out early, so measure everything at the same visit and replace parts with similar wear together.
Related guides and collections
See Caterpillar hub, CAT 259D, 289C, and 299D: Solving Drive Sprocket Wear in CTL Machines, rubber track sizing and fitment guide, idler wear and replacement guide, sprocket wear and replacement guide, Caterpillar rubber tracks guide and all rubber tracks.
FAQ
Which track sizes are listed for the Caterpillar 299D?
450 × 86 × 60. Confirm it against the stamp inside your track.
How do I pick the right sprocket?
Use the number on your current sprocket and count the teeth and bolt holes before ordering.
Do parts for related machines fit the Caterpillar 299D?
Only when the product page lists your model. Check each listing and your part number.