AFTparts
Messersi M08E, M16, M18, M20 ‖ Rubber Tracks ‖ 230x72x45
$537.99 CADUnit price /UnavailableVery low stock (1 unit)
Bertani Undercarriage Parts: Sizes, Part Numbers and Care
AFTparts Canada lists rubber tracks for the Bertani on this page, each matched to the machine by its product page. Many of these parts are shared with related machines, so confirm with the size or number on the part you are replacing.
What fits
- Rubber tracks — 230 × 72 × 45 — fits by size (width × pitch × links)
How to confirm fit
- Step 1: Read the model and serial number on the machine plate.
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. Where the stamp is unreadable, photos and measurements let our team compare the part before you order.
About tracks that fit by size
Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.
Reading a rubber track size
A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.
Signs a part is due
- Uneven idler wear or a wobbling idler.
- Seized or leaking rollers.
- Missing or torn lugs on the track.
- Teeth on the sprocket worn to sharp tips.
Inspection and Canadian conditions
- Walk around the machine daily and check the tracks for torn edges and missing lugs.
- Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
- Spin-check visible rollers and look for flat spots or leaking seals.
- Look at sprocket teeth for sharpening or hooking.
After snow or mud work, clean the track frame before the machine sits in the cold. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.
Replace one part or several?
When one component is clearly worn, check the rest. Fitting a new track on a worn sprocket shortens its life; matched replacement usually gives more even wear.
Related guides and collections
See rubber track sizing and fitment guide and all rubber tracks.
FAQ
Which track sizes are listed for the Bertani?
230 × 72 × 45. Confirm it against the stamp inside your track.
Do parts for related machines fit the Bertani?
Only when the product page lists your model. Check each listing and your part number.