< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

BFG1005

(1 products)
View as

BFG1005 Undercarriage Parts: Matching Parts by Number

AFTparts Canada lists rubber tracks for the BFG1005 on this page, each matched to the machine by its product page. Many of these parts are shared with related machines, so confirm with the size or number on the part you are replacing.

What fits

  • Rubber tracks — 230 × 72 × 44 (width × pitch × links)

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (BFG1005).
  • Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
  • Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.

Reading a rubber track size

A track stamp such as 320 × 86 × 52 means 320 mm wide, 86 mm pitch and 52 links. Letters added to the size usually describe the tread, so width, pitch and links are the numbers that decide fit.

Signs a part is due

  • Tracks that slip or jump on the sprocket under load.
  • Rollers that leak oil or no longer turn freely.
  • Idler flanges worn thin on one side.
  • Lugs cracked down to the cords.

Before you order

Have the model, serial number and the numbers from your old parts ready. Photos of the old track stamp and of the sprocket help when a stamp is worn. Our team uses these details only to confirm fit against parts listed on this store.

Inspection and Canadian conditions

  • Walk around the machine daily and check the tracks for torn edges and missing lugs.
  • Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
  • Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
  • Inspect sprocket teeth for hooked or pointed tips.

After snow or mud work, clean the track frame before the machine sits in the cold. On gravel and broken concrete, slow down and avoid spin turns that tear lug edges.

Replace one part or several?

When one component is clearly worn, check the rest. Fitting a new track on a worn sprocket shortens its life; matched replacement usually gives more even wear.

Related guides and collections

See rubber track sizing and fitment guide and all rubber tracks.

FAQ

Which track sizes are listed for the BFG1005?
230 × 72 × 44. Confirm it against the stamp inside your track.

Do parts for related machines fit the BFG1005?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...