AFTparts
Kubota HG, KH012G, KH012HG, KH014 ‖ Rubber Tracks ‖ 230x72x42
$409.99 CAD$499.99Unit price /Unavailable
Chikusui Undercarriage Parts: Fit, Care and Replacement in Canada
AFTparts Canada lists rubber tracks for the Chikusui on this page, each matched to the machine by its product page. Fitment lists often span several models, so match your own track stamp or part number before you order.
What fits
- Rubber tracks — 230 × 72 × 42 — fits by size (width × pitch × links)
How to confirm fit
- Step 1: Read the model and serial number on the machine plate.
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.
About tracks that fit by size
Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.
Reading a rubber track size
The size moulded inside a track gives width, pitch and link count. Treat any letter code as the tread pattern; the three numbers are what must match your machine.
Signs a part is due
- Tracks that slip or jump on the sprocket under load.
- Rollers that leak oil or no longer turn freely.
- Idler flanges worn thin on one side.
- Lugs cracked down to the cords.
Inspection and Canadian conditions
- At the start of each shift, look for cuts, cracked lugs or exposed cords on the tracks.
- Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
- Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
- Check the sprocket for thin, hooked teeth.
Before an overnight freeze, dig out clay and snow from the undercarriage; frozen build-up strains the track at the next start. On rocky or demolition ground, avoid sharp counter-rotation turns.
Replace one part or several?
Track, rollers, idler and sprocket wear as a set. A new track on hooked teeth or a seized roller wears out early, so measure everything at the same visit and replace parts with similar wear together.
Related guides and collections
See rubber track sizing and fitment guide and all rubber tracks.
FAQ
Which track sizes are listed for the Chikusui?
230 × 72 × 42. Confirm it against the stamp inside your track.
Do parts for related machines fit the Chikusui?
Only when the product page lists your model. Check each listing and your part number.