< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

GL640

(1 products)
View as

Dumper GL640 Undercarriage Parts in Canada: What Fits and How to Check

This collection brings together rubber tracks whose fitment lists name the Dumper GL640. Many of these parts are shared with related machines, so confirm with the size or number on the part you are replacing.

What fits

  • Rubber tracks — 230 × 72 × 44 — fits by size (width × pitch × links)

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (GL640).
  • Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
  • Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.

About tracks that fit by size

Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.

Reading a rubber track size

Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.

Inspection and Canadian conditions

  • Check both tracks for chunking, cracks at the lug base and visible steel cord.
  • Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
  • Spin-check visible rollers and look for flat spots or leaking seals.
  • Look at sprocket teeth for sharpening or hooking.

Before an overnight freeze, dig out clay and snow from the undercarriage; frozen build-up strains the track at the next start. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.

Replace one part or several?

Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.

Related guides and collections

See Dumper hub, rubber track sizing and fitment guide and all rubber tracks.

FAQ

Which track sizes are listed for the Dumper GL640?
230 × 72 × 44. Confirm it against the stamp inside your track.

Do parts for related machines fit the Dumper GL640?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...