AFTparts
Bobcat 320, 321, 322, 323, 322G, E16, E322 ‖Rubber Tracks ‖ 230x96x33
$487.99 CADUnit price /Unavailable
Hinowa Undercarriage Parts in Canada: What Fits and How to Check
AFTparts Canada lists rubber tracks for the Hinowa on this page, each matched to the machine by its product page. Because several listings cover more than one machine, the part number on your old component is the safest guide.
What fits
- Rubber tracks — 230 × 96 × 33 — fits by size (width × pitch × links)
How to confirm fit
- Step 1: Read the model and serial number on the machine plate.
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. If a number is worn away, measure the part and send photos so we can compare it with stocked listings.
About tracks that fit by size
Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.
Reading a rubber track size
Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.
Inspection and Canadian conditions
- At the start of each shift, look for cuts, cracked lugs or exposed cords on the tracks.
- Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
- Watch for seized or wobbling rollers and uneven idler wear.
- Check the sprocket for thin, hooked teeth.
After snow or mud work, clean the track frame before the machine sits in the cold. Avoid climbing curbs at an angle, a common cause of de-tracking and edge cuts.
Replace one part or several?
Track, rollers, idler and sprocket wear as a set. A new track on hooked teeth or a seized roller wears out early, so measure everything at the same visit and replace parts with similar wear together.
Related guides and collections
See rubber track sizing and fitment guide and all rubber tracks.
FAQ
Which track sizes are listed for the Hinowa?
230 × 96 × 33. Confirm it against the stamp inside your track.
Do parts for related machines fit the Hinowa?
Only when the product page lists your model. Check each listing and your part number.