HUKI100 Undercarriage Parts in Canada: What Fits and How to Check
AFTparts Canada lists rubber tracks for the HUKI100 on this page, each matched to the machine by its product page. Fitment lists often span several models, so match your own track stamp or part number before you order.
What fits
- Rubber tracks — 230 × 72 × 44 (width × pitch × links)
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (HUKI100).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
Each listing here covers a specific part number or track size. Where the stamp is unreadable, photos and measurements let our team compare the part before you order.
Reading a rubber track size
The size moulded inside a track gives width, pitch and link count. Treat any letter code as the tread pattern; the three numbers are what must match your machine.
Signs a part is due
- Uneven idler wear or a wobbling idler.
- Seized or leaking rollers.
- Missing or torn lugs on the track.
- Teeth on the sprocket worn to sharp tips.
Before you order
Gather the machine serial, the track stamp and any cast numbers on the steel parts. With those details, fit can be checked against store listings instead of being guessed.
Storage and off-season care
When the machine sits for weeks, clean it, relieve track tension within the manual's limits and park it on a firm, dry surface, then re-tension before work resumes.
Inspection and Canadian conditions
- Check both tracks for chunking, cracks at the lug base and visible steel cord.
- Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
- Watch for seized or wobbling rollers and uneven idler wear.
- Look at sprocket teeth for sharpening or hooking.
After snow or mud work, clean the track frame before the machine sits in the cold. On rocky or demolition ground, avoid sharp counter-rotation turns.
Replace one part or several?
Track, rollers, idler and sprocket wear as a set. A new track on hooked teeth or a seized roller wears out early, so measure everything at the same visit and replace parts with similar wear together.
Related guides and collections
See rubber track sizing and fitment guide and all rubber tracks.
FAQ
Which track sizes are listed for the HUKI100?
230 × 72 × 44. Confirm it against the stamp inside your track.
Do parts for related machines fit the HUKI100?
Only when the product page lists your model. Check each listing and your part number.