< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

MINI22

(1 products)
View as

Piccini MINI22 Undercarriage Parts: Fit, Care and Replacement in Canada

AFTparts Canada lists rubber tracks for the Piccini MINI22 on this page, each matched to the machine by its product page. Fitment lists often span several models, so match your own track stamp or part number before you order.

What fits

  • Rubber tracks — 230 × 72 × 39 — fits by size (width × pitch × links)

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (MINI22).
  • Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
  • Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If a number is worn away, measure the part and send photos so we can compare it with stocked listings.

About tracks that fit by size

Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.

Reading a rubber track size

The size moulded inside a track gives width, pitch and link count. Treat any letter code as the tread pattern; the three numbers are what must match your machine.

Signs a part is due

  • Tracks that slip or jump on the sprocket under load.
  • Rollers that leak oil or no longer turn freely.
  • Idler flanges worn thin on one side.
  • Lugs cracked down to the cords.

Inspection and Canadian conditions

  • Check both tracks for chunking, cracks at the lug base and visible steel cord.
  • Set sag to the operator's manual and re-check after a cold start; temperature swings change how the track sits.
  • Watch for seized or wobbling rollers and uneven idler wear.
  • Look at sprocket teeth for sharpening or hooking.

Before an overnight freeze, dig out clay and snow from the undercarriage; frozen build-up strains the track at the next start. On rocky or demolition ground, avoid sharp counter-rotation turns.

Replace one part or several?

Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.

Related guides and collections

See Piccini hub, rubber track sizing and fitment guide and all rubber tracks.

FAQ

Which track sizes are listed for the Piccini MINI22?
230 × 72 × 39. Confirm it against the stamp inside your track.

Do parts for related machines fit the Piccini MINI22?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...