< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=696062565948397&ev=PageView&noscript=1" />

N80

(1 products)
View as

Hanix N80 Undercarriage Parts: Sizes, Part Numbers and Care

This collection brings together rubber tracks whose fitment lists name the Hanix N80. Fitment lists often span several models, so match your own track stamp or part number before you order.

What fits

  • Rubber tracks — 180 × 72 × 36 — fits by size (width × pitch × links)

How to confirm fit

  • Step 1: Read the model and serial number on the machine plate (N80, N80.2, N80.2R).
  • Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
  • Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
  • Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.

Choosing between listed options

Each listing here covers a specific part number or track size. If you cannot read the number, send clear photos and the machine serial so the part can be identified.

About tracks that fit by size

A few tracks here carry another brand's name in the title. These fit by size, not as OEM parts, so compare width, pitch and link count with your old track before ordering.

Reading a rubber track size

The size moulded inside a track gives width, pitch and link count. Treat any letter code as the tread pattern; the three numbers are what must match your machine.

Signs a part is due

  • Tracks that slip or jump on the sprocket under load.
  • Rollers that leak oil or no longer turn freely.
  • Idler flanges worn thin on one side.
  • Lugs cracked down to the cords.

Inspection and Canadian conditions

  • Check both tracks for chunking, cracks at the lug base and visible steel cord.
  • Keep tension to the manual figure; spring and fall temperature swings can move it day to day.
  • Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
  • Inspect sprocket teeth for hooked or pointed tips.

After snow or mud work, clean the track frame before the machine sits in the cold. On rocky or demolition ground, avoid sharp counter-rotation turns.

Replace one part or several?

Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.

Related guides and collections

See Hanix hub, rubber track sizing and fitment guide and all rubber tracks.

FAQ

Which track sizes are listed for the Hanix N80?
180 × 72 × 36. Confirm it against the stamp inside your track.

Do parts for related machines fit the Hanix N80?
Only when the product page lists your model. Check each listing and your part number.

Compare /3

Loading...