AFTparts
Case 50 MAXI, 50RTB, CK50, CK52, CX50 ‖ Rubber Tracks ‖ 400x72.5Nx72
$1,877.99 CADUnit price /UnavailableVery low stock (4 units)AFTparts
Komatsu PC15-7,PC20MRX UTILITY ‖ Rubber Tracks ‖ 300x52.5Nx78
$828.99 CADUnit price /UnavailableVery low stock (2 units)
Komatsu UTILITY Undercarriage Parts in Canada: What Fits and How to Check
AFTparts Canada lists rubber tracks for the Komatsu UTILITY on this page, each matched to the machine by its product page. Many of these parts are shared with related machines, so confirm with the size or number on the part you are replacing.
What fits
- Rubber tracks — 300 × 52.5 × 78 (N tread), 400 × 72.5 × 72 (N tread) — fits by size (width × pitch × links)
How to confirm fit
- Step 1: Read the model and serial number on the machine plate (PC20MRX UTILITY, PC45-R UTILITY).
- Step 2: Read the size moulded inside the old track and compare width, pitch and link count with the sizes above.
- Step 3: Check the tread letter or part reference on the old part if you want the same pattern or design again.
- Step 4: Still unsure? Use Check Fitment on Contact Us with model, serial and part numbers.
Choosing between listed options
More than one rubber tracks number is listed here. They are separate listings, so read the number on your current part rather than judging by shape or colour. If a number is worn away, measure the part and send photos so we can compare it with stocked listings.
About tracks that fit by size
Some tracks on this page are listed under another machine brand. They are not original-equipment parts; they are matched to your machine by size, so the width, pitch and link count must agree with your current track.
Reading a rubber track size
Rubber track sizes are written as width × pitch × number of links, all in millimetres except the link count. A letter after the pitch, such as B, Q or N, usually marks the tread pattern rather than a different fit.
Inspection and Canadian conditions
- Check both tracks for chunking, cracks at the lug base and visible steel cord.
- Measure sag as the manual describes, and again once the machine warms up on a frosty morning.
- Look for rollers that do not turn, oil at the seals and idler flanges worn on one side.
- Check the sprocket for thin, hooked teeth.
In winter, clear packed snow, slush and mud from the frame before parking so nothing freezes around the rollers overnight. On rocky or demolition ground, avoid sharp counter-rotation turns.
Replace one part or several?
Undercarriage parts age together. If the track is due, look hard at the sprocket and idler too, and change matched wear parts together where they are near the end of their life.
Related guides and collections
See Komatsu hub, rubber track sizing and fitment guide and all rubber tracks.
FAQ
Which track sizes are listed for the Komatsu UTILITY?
300 × 52.5 × 78, 400 × 72.5 × 72. Match the size stamped inside your current track.
Do parts for related machines fit the Komatsu UTILITY?
Only when the product page lists your model. Check each listing and your part number.