Kubota Skid Steer Tracks: SVL75, SVL90, SVL95 and SVL97 Sizes Explained
Browse rubber track product information.
Kubota skid steer tracks are sold by width, pitch and number of links, and the right combination depends on which SVL loader you run and, on the SVL75-3, which width it left the factory with. This guide sorts the SVL75, SVL90, SVL95 and SVL97 into the size codes AFTparts Canada lists, shows what each costs in CAD, and flags where the sources disagree so you can check before you order.
Last modified: November 20, 2026
Kubota skid steer tracks: which size fits your SVL?
Kubota skid steer tracks for the SVL75 family use an 86 mm pitch with 52 links, in 320 mm or 380 mm widths on the AFTparts listings. The SVL90, SVL95 and SVL97 use a wider 450x86x58 track. Always confirm the size code on your old track and your serial number before ordering.

That is the short version. The sections below explain where each size applies, why the SVL75-3 needs an extra check, and what to inspect besides the tracks. Prices and fitment lists come from the AFTparts product pages as read on November 20, 2026.
Kubota SVL track size chart: SVL65-2, SVL75 family, SVL90, SVL95 and SVL97
Table 1 maps each loader to the track sizes named on AFTparts fitment lists. For a wider overview of one model, see our guide to SVL75 track sizes and fitment in Canada. To browse every part we list for the brand, open the Kubota undercarriage parts collection.
| Kubota model | Track size codes on AFTparts pages | Kubota-stated standard width |
|---|---|---|
| SVL65-2 | No track listing names this model in our review; the SVL65-2 appears on a sprocket listing | Not covered here |
| SVL75, SVL75-2 | 320x86Qx52, 320X86BX52, 320X86X52, 380x86Cx52 | Not covered here |
| SVL75-2C | 380x86Cx52 | Not covered here |
| SVL75-3 | 380x86Cx52 (fitment list) | 320 mm per Kubota USA; 400 mm per Kubota Canada |
| SVL90, SVL90-2, SVL95, SVL95-2, SVL97, SVL97-2, SVL97-2S | 450x86Bx58 | 450 mm for the SVL97-2 per Kubota USA |
Read the table as a starting point, not a guarantee. Fitment lists on product pages name the models each part is listed for, and the machine in your yard may differ by serial range.
SVL75-2 vs SVL75-3: what changed, and does the track size change?
The difference Kubota itself states is speed. In the Kubota SVL75-3 brochure, the SVL75-3 has a high travel speed of 13.7 km/h, which is 2.4 km/h faster than the SVL75-2, and a low speed of 9.0 km/h, 1.5 km/h faster. The same brochure lists 400 mm wide tracks as optional for the SVL75-3.
On the AFTparts side, the 380x86Cx52 page names the SVL75, SVL75-2, SVL75-2C and SVL75-3 together, while the three 320 mm listings name only the SVL75 and SVL75-2. That is the only SVL75-3 track fitment we can point to, so treat the SVL75-3 as the model that needs a serial check rather than assuming it shares every size with the SVL75-2.
Standard or wide on an SVL75: 320, 380 and 400 mm compared
Three widths come up for the SVL75 family. They are not interchangeable by guess, because the width has to match the machine's undercarriage and what is already fitted.
- 320 mm: AFTparts lists 320x86Qx52, 320X86BX52 and 320X86X52 for the SVL75 and SVL75-2. The Kubota USA SVL75-3 brochure gives 320 mm (12.6 in) as the standard width on the SVL75-3.
- 380 mm: AFTparts lists 380x86x52 tracks for the SVL75 (380x86Cx52), named for the SVL75, SVL75-2, SVL75-2C and SVL75-3.
- 400 mm: The Kubota USA brochure lists 400 mm (15.8 in) as the wide option, and the Kubota Canada SVL75-3 page lists 400 mm as standard. AFTparts does not list a 400 mm track on the pages used for this guide.

As a general rule, a narrower track puts less side load on rollers and fits tighter work, while a wider track spreads the machine's weight over more ground. We do not have test figures for either, so we do not quote any. Because Kubota USA and Kubota Canada disagree on the SVL75-3 standard width, read the serial number plate and the size moulded on the inside of your current track, then ask us to check the fit.
Choosing a tread for Canadian ground: C-lug, block or zig zag in snow and mud
Tread choice is about the ground you work on. In general, lug patterns bite into soft ground and mud, block patterns give a steadier ride on hard or paved surfaces, and zig zag patterns are a middle option. These are general descriptions, not test results, and AFTparts product pages do not publish tread performance data.
The practical advice is simple. Keep the same pattern family as the tracks you are replacing unless your work has changed, and tell us about the ground, season and machine when you ask for a fitment check. We do not make life or traction claims for any pattern.
Reading the size code: what 320x86x52 and 450x86x58 tell you
A rubber track size is written as width x pitch x number of links. The 320x86x52 is 320 mm wide with an 86 mm pitch and 52 links. The 450x86x58 is 450 mm wide with an 86 mm pitch and 58 links. A letter after the pitch, such as Q, B or C, usually marks a variant, so match it too. For the wider picture across makes, see the Kubota rubber track sizes for SVL loaders.
Several of these sizes are also listed for other brands. The 320 mm listings name Bobcat T200, T630, T650, 864 and 864H, JCB Robot 190T, John Deere CT319D to CT323E and Wacker Neuson ST31. The 380x86Cx52 page adds John Deere CT325G and the Takeuchi TL10V2 and TL8R2. The 450x86Bx58 page names Gehl RT250 and VT320 and John Deere 331G and 333G. That shared sizing is why you match the size code and not only the brand name.
Check the sprocket and rollers before the new tracks go on
New tracks on a worn undercarriage wear out sooner than they should, so check the parts that drive and carry them. AFTparts lists sprocket V0511-21110 (15T/9H) for the SVL65-2, SVL75, SVL75-2, SVL75C, SVL75-2C and SVL75-3, and sprocket V0611-21112 (17T/9H) for the SVL90, SVL90-2, SVL90C, SVL90-2C, SVL95-2, SVL95-2S, SVL97-2 and SVL97-2C.
Track roller V051125100, with reference numbers V0511-25100 and V0511-25104, is listed from the SVL75 up to the SVL97-2S. Kubota's brochures show 4 track rollers per side on the SVL75-3 and 5 per side on the SVL97-2 per its Kubota USA SVL97-2 spec sheet. Check tension after fitting; our guide to adjusting skid steer rubber track tension covers the routine.
Before any undercarriage work, follow CCOHS guidance on compact loaders: turn off the engine, lower the bucket and set the parking brake.
What replacement Kubota SVL tracks cost in Canada
Table 2 lists the prices shown on the AFTparts product pages on November 20, 2026. These are prices at time of writing and can change, so confirm on the page. The larger SVL models use the 450x86x58 tracks for SVL90, SVL95 and SVL97, which is the highest-priced track in the table.
| Item | SKU | Price (CAD) | Kubota models named on the page |
|---|---|---|---|
| Rubber track 320x86Qx52 | KR32086Q521 | 1,157.99 | SVL75, SVL75-2 |
| Rubber track 320X86X52 | 3208652 | 1,169.99 | SVL75, SVL75-2 |
| Rubber track 320X86BX52 | KR32086B521 | 1,289.99 | SVL75, SVL75-2 |
| Rubber track 380x86Cx52 | KR38086C521 | 1,515.99 | SVL75, SVL75-2, SVL75-2C, SVL75-3 |
| Rubber track 450x86Bx58 | KR45086B581 | 1,649.99 | SVL90, SVL90-2, SVL95, SVL95-2, SVL97, SVL97-2, SVL97-2S |
| Sprocket V0511-21110 | V051121110 | 399.99 | SVL65-2, SVL75 family |
| Sprocket V0611-21112 | V061121112 | 459.99 | SVL90, SVL95-2, SVL97-2 families |
| Track roller V051125100 | V051125100 | 549.99 | SVL75 to SVL97-2S |

Every product page shows the same warranty line: 12 Month Pro Rated Limited Warranty. Read the full terms on the page you buy from. We do not publish labour costs here.
Ordering checklist: model, serial, size code and photos
A wrong-size track costs more than a short wait for an answer. Before you order, gather the following and send it through the Check Fitment form on our Contact Us page.
- The exact Kubota model, such as SVL75-2 or SVL75-3, and the serial number from the plate.
- The full size code moulded on the inside of the old track, letters included.
- The tread pattern you have now and the ground you work on.
- Photos of the old track, the sprocket and the rollers.
- Part numbers on any sprocket or roller you plan to replace together.
With those details we can compare your machine against the fitment lists above and tell you which listing matches, or tell you if we cannot confirm it.
FAQ
What is the difference between Kubota SVL 75 2 and 75 3?
Kubota's SVL75-3 brochure lists a high travel speed of 13.7 km/h, 2.4 km/h faster than the SVL75-2, and a low speed of 9.0 km/h, 1.5 km/h faster. Track size is a separate question: AFTparts lists the SVL75, SVL75-2 and SVL75-3 on its 380x86Cx52 page and the SVL75 and SVL75-2 on its 320 pages, so confirm your serial number before ordering.
How much does it cost to put new tracks on a skid steer?
For the Kubota SVL listings in this guide, AFTparts shows rubber track prices from CAD 1,157.99 (320x86Qx52) to CAD 1,649.99 (450x86Bx58) on 2026-11-20. Prices change, so check the product page. Installation labour is not covered here because we have no sourced figure for it.
What size track for Kubota SVL 75?
The SVL75 family uses an 86 mm pitch with 52 links. AFTparts lists 320 mm and 380 mm widths for it, and Kubota lists a 400 mm wide option on the SVL75-3. Match the full size code printed on your old track, then confirm it against your model and serial number.
How wide are the tracks on a Kubota SVL75-3?
Sources disagree. The Kubota USA brochure lists 320 mm standard and 400 mm wide, while the Kubota Canada page lists 400 mm standard. Check the serial number and the size moulded on the inside of your current track before you order.
Related articles
Mini Excavator Rubber Track Size Chart by Make & Model
Knowledge
Importing Excavator Undercarriage Parts to Canada: What Drives Your Landed Cost in 2026
Knowledge
When to Replace Excavator Undercarriage Parts: Component-by-Component Signs for Older Machines
Knowledge
Elongated Track Roller Bolt Holes: What to Document First
Knowledge